Electric Actuator

Rack and Pinion Actuator with Double Acting

 Actuator

1,Indicator
     Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box, positioner and so on.
2,Pinion
     The pinion is high-precision and integrative,made form nickelled-alloy steel, full conform to the latest standards of ISO5211,DIN3337,NAMUR. The dimensions can be customized and the stainless steel is available.
3,Actuator Body
     According to the different requirements, the extruded aluminum alloy ASTM6005
Body can be treated with hard anodized, powder  polyester  painted ( different
colours is available such as blue, orange, yellow etc.),PTFE or Nickel plated.
4,End caps
     Die-casting aluminum powder polyester painted  in  different  colours,  PTFE  or Nickel plated.
5,Pistons
     The twin rack pistons are made form Die-casting   aluminum   treated   with   Hard anodized or made form Cast steel  with galvanization. Symmetric mounting position, long cycle life and fast operation, reversing rotation by simply inverting the pistons.
6,Travel adjustment
    The tow independent external travel stop adjustment bolts can adjust±5°at both open and close directions easily and precisely.
7,High performance springs
    Preloaded coating springs are made form the high quality material for resistant to corrosion and longer service life, which can be denounced safelyand conveniently to satisfy different requirements of torque by changing quantity of springs.
8,Bearings & Guides
    Made form low friction, long-life compound material, to avoid the direct contact between metals. The maintenance and replacement are easy and convenient.
9,O-rings
    NBR rubber O-rings provide trouble-free operation at standard temperature ranges.For high and low temperature applications Viton or Silicone.




Operating conditions

1.Operating media

Dry or lubricated air, or the non-corrosive gases
The maximum particle diameter must less than 30μm

2.Air supply pressure
The minimum supply pressure is 2.5 Bar
The maximum supply pressure is 8 Bar

3.Operating temperature
Standard:-20°C~+80°C
Low temperature:-35°C~+80°C
High temperature:-15°C~+150°C

4.Travel adjustment
Have adjustment range of ±5°

for the rotation at 0°and 90°

5.Application
Either indoor or outdoor











Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products. 

Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent

We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed

2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year

3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.

4.Which port are you shipping?
Q:Ningbo or Shanghai Port

5.Can we print the LOGO on products?
Yes, and we support the OEM.

6.Do you have any certification?
Q:Yes, we have 12  patents for the products.

7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .

8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail

9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.

10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you. Rack and Pinion Actuator with Double Acting

 Actuator

1,Indicator
     Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box, positioner and so on.
2,Pinion
     The pinion is high-precision and integrative,made form nickelled-alloy steel, full conform to the latest standards of ISO5211,DIN3337,NAMUR. The dimensions can be customized and the stainless steel is available.
3,Actuator Body
     According to the different requirements, the extruded aluminum alloy ASTM6005
Body can be treated with hard anodized, powder  polyester  painted ( different
colours is available such as blue, orange, yellow etc.),PTFE or Nickel plated.
4,End caps
     Die-casting aluminum powder polyester painted  in  different  colours,  PTFE  or Nickel plated.
5,Pistons
     The twin rack pistons are made form Die-casting   aluminum   treated   with   Hard anodized or made form Cast steel  with galvanization. Symmetric mounting position, long cycle life and fast operation, reversing rotation by simply inverting the pistons.
6,Travel adjustment
    The tow independent external travel stop adjustment bolts can adjust±5°at both open and close directions easily and precisely.
7,High performance springs
    Preloaded coating springs are made form the high quality material for resistant to corrosion and longer service life, which can be denounced safelyand conveniently to satisfy different requirements of torque by changing quantity of springs.
8,Bearings & Guides
    Made form low friction, long-life compound material, to avoid the direct contact between metals. The maintenance and replacement are easy and convenient.
9,O-rings
    NBR rubber O-rings provide trouble-free operation at standard temperature ranges.For high and low temperature applications Viton or Silicone.




Operating conditions

1.Operating media

Dry or lubricated air, or the non-corrosive gases
The maximum particle diameter must less than 30μm

2.Air supply pressure
The minimum supply pressure is 2.5 Bar
The maximum supply pressure is 8 Bar

3.Operating temperature
Standard:-20°C~+80°C
Low temperature:-35°C~+80°C
High temperature:-15°C~+150°C

4.Travel adjustment
Have adjustment range of ±5°

for the rotation at 0°and 90°

5.Application
Either indoor or outdoor











Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products. 

Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent

We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed

2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year

3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.

4.Which port are you shipping?
Q:Ningbo or Shanghai Port

5.Can we print the LOGO on products?
Yes, and we support the OEM.

6.Do you have any certification?
Q:Yes, we have 12  patents for the products.

7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .

8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail

9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.

10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.