Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator

January 29, 2024

Model NO.: DTI 1500-500

Trademark: X-ing

Transport Package: Wooden Case

Specification: 200*96*105 (cm)

Origin: China

HS Code: 841280009

model	thrust	speed	push distance	motor model
DTI 1500-500	1500	80	500	JW5024

Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator

The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal, chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on, with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
DT type electric linear actuator
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from 0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire, explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing and other departments.

NO.	Type	Trust (kg)	Route (mm)	Speed (mm/s)	Motor		380(V)		Le(mm)		contour dimension (LWH)mm	(weight) (kg)
					Type	Power(w)	Revolution (T/Min)	Electricity(A)	LeMin	LeMax
1	25-20-I	25	200	48	AO₂5024	40	1400	0.23	369	569	580125118	7.5
2	25-20-II	25	200	96	AO₂5022	60	2800	0.23	369	569	580125118	7.5
3	100-40-I	100	400	42	AO5624	120	1400	0.47	640	1040	858152206	23
4	100-40-II	100	400	84	AO5622	180	2800	0.52	640	1040	858152206	23
5	300-50-I	300	500	42	AO6334	370	1400	1.12	745	1245	998170226	35
6	300-50-II	300	500	84	AO6332	550	2800	1.38	745	1245	998170226	35
7	500-50-I	500	500	50	AO7134	750	1400	2.02	778	1278	1098190226.5	52
8	500-50-II	500	500	100	AO7132	1100	2800	2.6	778	1278	1098190226.5	52
9	700-60-I	700	600	50	AO7134	750	1400	2.02	803	1343	1193200279	63
10	700-60-II	700	600	100	AO7132	1100	2800	2.6	803	1343	1193200279	63
11	1000-60-I	1000	600	50	JO₂-21-4	1100	1400	2.68	883	1483	1260204271	75
12	1000-60-II	1000	600	100	JO₂-21-2	1500	2860	3.24	883	1483	1260204271	75
13	1600-80-I	1600	800	50	JO₂-31-4	2200	1400	4.9	1063	1863	1535302330
14	1600-80-II	1600	800	100	JO₂-31-2	3000	2860	8.06	1063	1863	1535302330

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9, Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork

OUR WORKSHOP
Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator

Packing:

FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment. or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.
If you have another question,pls feel free to contact us as below:

Due to the special nature of the product, the online price is a regular offer, pls send your detail technical request, we will offer you according to your actual needs .

Entre em contato conosco

Author:

Ms. Sun

E-mail:

sales@dgrelectriccylinder.com

Phone/WhatsApp:

+8618165712972

Produtos populares

Notícias